The power in the wind depends only on the rotor area and the cube of the wind speed. A vertical turbine with a 0.8 × 1.8 m rotor faces at most about 1500 W of total wind power at 12 m/s (23 kn) – 3000 W would require almost 200 % of it. That is physically impossible.
No rotor can extract more than 59 % of the wind’s energy, otherwise the air behind the rotor would stop. Good small horizontal turbines reach 30–40 % in practice, small vertical turbines 15–25 %.
For the same swept area, a horizontal (propeller) turbine produces considerably more power. Vertical turbines are quieter and work from any wind direction, but harvest less. Many cheap offers are vertical turbines with heavily exaggerated ratings.
What matters is the average wind, not the rated power. Half the wind speed means only one eighth of the power: a 1.2 m rotor delivers only about 25 W at 10 kn (5 m/s). The calculator estimates the yield for your average wind.
On a sailing boat often yes, especially at anchor in windy areas and in winter when solar is weak. Proven marine turbines with a rotor of about 1.2 m deliver 350–500 W in strong wind. On land, buildings and trees slow the wind down – there, solar usually gives more for the same money.
Reputable manufacturers state rotor diameter, rated wind speed and a power curve, ideally independently measured (e.g. IEC 61400-12, MCS). If dimensions are missing or the calculator shows more than about 40 % required, it is marketing. A CE mark says nothing about performance.
Note: This calculator provides a physical estimate based on manufacturers’ data and simplified assumptions. It does not replace a wind measurement at the site or professional advice. Liability for decisions based on the results is excluded to the extent permitted by law.